Skip to content

Powertrain

These are specific codes to indicate faults in the car’s engine or transmission system. The Powertrain is a set of parts in the car that create the power necessary for the car to move over any terrain. It usually consists of the engine, transmission, axles, steering and differentials. In addition, these types of codes are identified by the letter P, preceded by 4 digits that specify the type of failure and its location. It can be in the fuel system, ignition and emissions.

P3401

P3401 - CYLINDER 1 DEACTIVATION / INTAKE VALVE CONTROL CIRCUIT/OPEN

The circuit that controls the intake valve is used to adapt to the ...

P3101

P3101 - FAULT CODE - OBD2

The combustion chamber receives a high-pressure injection from the injection valve, which is ...

P2600

P2600 - COOLANT PUMP "A" CONTROL CIRCUIT / OPEN

The coolant pump is located at the front or top of the engine, ...

P2503

P2503 - CHARGING SYSTEM VOLTAGE LOW

The vehicle’s charging system is responsible for maintaining the charge and sending the ...

P2414

P2414 - O2 SENSOR EXHAUST SAMPLE ERROR BANK 1 SENSOR 1

The Oxygen sensor (O2) is an electronic device whose purpose is to measure ...

P2305

P2305 - IGNITION COIL "B" SECONDARY CIRCUIT

The ignition coil transforms the voltage from the battery to a voltage necessary ...